Specifications |
Flir IRW-3C 3in InfraRed Window |
General Specs |
NEMA Enviroment Type |
Type 4/12 (outdoor/indoor) |
Voltage Range |
Any |
Automatically Grounded |
Yes |
Maximum Operating Temperature |
500°F/260°C |
Body Material |
Anodized Aluminum |
Gasket Material |
Silicone |
Hardware Material |
Steel |
Compatiable with All FLIR Cameras |
Yes |
PIRma-Lock Installation System |
Yes |
Cover and Fastener Permanently Attached |
Yes |
Single-hole Installation |
Yes |
Thumb Screw and Safety Screw Included |
Yes |
Broadband IR - Short, Mid, & Longwave |
Yes |
Visible Light Spectrum |
Yes |
Picture in Picture & Fusion Image Blending |
Yes |
|
Size Specifications |
Dimensions |
4.22" x 3.89" x 1.05" (107.4 x 99.0 x 26.86mm) |
Required Actual Hole Diameter (Nominal) |
88.9mm (3-1/2”) |
Greenlee Punch |
739BB |
Recommended Max Panel Thickness |
3.2mm (1/8”) |
|
Optic Specifications |
Optic Material |
Calcium Fluoride |
Optic Diameter |
75mm (2.95”) |
Viewing Aperture Diameter |
69mm (2.71”) |
Viewing Aperture Area |
3739mm² (5.79in²) |
Optic Maximum Temperature |
1355.6°C (2474°F) |
|
Ratings & Testing |
UL Component Recognition (UL 50V) |
Yes |
UL 50 / NEMA Enviroment Rating |
Type 4/12 |
CSA Certification, Product Class 3211 07 |
Yes |
Arc Flash Testing, IEC 62271-200 (KEMA) |
5kV, 63kA for 30 Cycles at 60Hz |
IP Rating, IEC 60529 (TUV) |
IP67 |
Vibration Testing, IEC 60068-2-6 (TUV) |
100 m/s^2 Vibration Withstand |
Humidity Testing, IEC 60068-2-3 (TUV) |
Extreme Humidity Withstand |
Mechanical Testing, ANSI/IEEE C37.20.2 section A3.6 (TUV) |
Impact and Load Resistant Cover |
Maximum Pullout Strength |
1655 kg (3650 lbs) |
|
Warranty: Limited Lifetime Warranty Against Manufacturer Defects |